A water heater can be connected to the kitchen faucet and bathroom faucet at home.When turned on, there will be heat. Water is also very comfortable to use.
In order for the water heater to continuously supply weak water , many families leave the water heater on 24 hours a day, but is this right? Will leaving the water heater on all year round affect its service life, and what hidden dangers will it bring to us?
Should the electric water heater be turned on 24 hours a day?
Some people will keep the water heater on at home 24 hours a day, so that hot water is more convenient. Every time they open the faucet, warm water will flow out. However, some people think that running the water heater 24 hours a day consumes too much power. That’s why they use it. Turn it on when not in use and turn it off when not in use.
In fact, most of the water heaters we use are first- and second-level energy efficiency water heaters. Normally, they don’t use much electricity even if they are powered on for a day. However, it is undeniable that if the water heater is left on for a long time, it will indeed cause certain hidden dangers. For example, the inside of the water heater The heating rod will keep working, just like boiling water quickly.
Water quality problems will also affect the working efficiency of the heating rod. Over time, some scale will form. Therefore, if the water heater is always powered on, then when the water temperature drops below the set temperature, the heating rod will start to work, and the cycle will repeat. It definitely consumes electricity, so if the water heater you use at home is on 24 hours a day, your electricity bill will be high.
The frequency and seasonality of water use are key
So do we turn it on when it is needed and turn it off when not in use? It is winter now, and hot water is used more frequently. If it is turned on when using it, it will take a long time for the water to heat up,
so what to do depends on the frequency of water use and the seasonality.. If you want to save electricity, you can turn on the water heater half an hour in advance.
But don’t ignore one thing, which is to clean the water heater regularly. If the heating rod inside has scale accumulation, it will consume more power and affect the water quality. You will find that the shower head at home is often blocked and you will feel wet after taking a shower. You will feel very itchy. In fact, this is caused by the water quality.
Take out the heating rod from the water heater and clean it, or replace it with a new magnesium rod. To clean the scale on the heating rod, you can use citric acid descaling agent, which will not harm the magnesium rod and has a particularly good descaling effect .
Just put the citric acid descaler into warm water. After it is safely dissolved, put the micro stick into it and soak it. Soak it for 10 to 20 minutes and the scale on it will automatically fall off.
After cleaning the magnesium rod, it can ensure that the water quality inside the water heater is not polluted, and the water is safer. Don't worry, In addition to cleaning the magnesium rod frequently, it is best to replace the shower head at home with a [supercharged shower head]
Previous The water outlet of the old-fashioned shower head will be blocked by scale after being used for a period of time. The water flow is intermittent and it will be different if it is replaced with a supercharged shower head. It uses a filter element inside to filter impurities in the water, making it more convenient and safer.
also has 5 levels of one-touch water-stopping mode, and 5 different water outlet methods, which can meet different water needs. adds countless water outlets and reduces the diameter of the water outlets to achieve the supercharging effect.
And experimental data proves that using a supercharged shower can save 30% of water consumption than an ordinary shower. compares the supercharged shower and the ordinary shower together. The effect is clear at a glance. Look at this supercharged shower. The shower head is cheap, but it is comparable to the shower heads of many foreign brands. With it, you can use water more conveniently and safely.
You can dismantle the old-fashioned shower head at home and install a supercharged shower head. Each water outlet method has a very strong water output, and it hits your body as if you are getting a massage, making you feel the strong water washing away.
In fact, it does not change the water pressure, but by adding a lot of water outlets and reducing the diameter of each water outlet to 0.1 mm to achieve the supercharging effect, so that every time you turn on the shower, you can feel the pressure. The water flow is 10% strong, especially suitable for users living on high floors.
The water pressure at home is unstable, the water flow is intermittent or the water outlet is blocked by scale, causing the water outlet to slow down. Many water outlets no longer produce water. After replacing it with this supercharged shower head, all problems will be solved. .
Summary:
Is it necessary to leave the water heater on 24 hours a day at home? I suggest you: if you want to save electricity, it is best to turn it on when in use. In addition, don’t forget to clean the internal heating rod, which is the magnesium rod. If the magnesium rod once If there is scale, it will consume more electricity and the water quality will be poor.
