Every Halloween, the class will arrange it, and then invite children dressed up as various ghosts to beg for sweets. The atmosphere is really joyful.
But it is difficult to be mom and dad, and they have to scratch their heads to DIY clothes for their babies. The handicapped party can not afford it.
Parents who want to save trouble can open the orange software and buy a set online.
If the kindergarten has regulations that can’t be bought, you can only do it yourself, so digest the content of this article. The small tour will give you some inspiration for DIY, so let's make a second creation.
First of all emphasize that before you start, no matter what makeup you put on your baby, what kind of clothes you wear, it is best to communicate with your child first and ask him if he has any special favorite roles. Don't be too scary , the key is that the child can accept and grasp the degree. After all, in China, everyone is still alive.
Do you remember the news that a child was dressed up as a faceless man by his mother a few years ago and scared other children to cry? However, it also reflects from the side that the faceless man really looks like.
Halloween Costume DIY articles
not seeking to do the most scary "ghost"
but to do the most adorable baby
sheets take a ghost
white sheets, from caps to his feet, eyes and mouth holes open position, Finished. Is
the easiest and most convenient?
can also wear a pair of sunglasses, and the whole family will go out together.
Mummy
put on a white T-shirt and pants as a primer, and then use toilet paper or gauze to wrap around the child. Finally, you can add some blood color with paint.
Dress up your pets together, pay attention to the eyes, inexplicable joy.
Octopus
Choose a sweater, and then buy 4-5 pairs of striped socks with the same color. If there are no stripes, you can stick them with tape yourself.
The child wears a pair of stockings, the rest of the socks are stuffed with cotton or rags, and they are tied in a circle around the waist, with a hat with eyes, and a simple and cute octopus costume That's it. Walking on the road will make people can't help but stop looking at which leg is walking.
bat suit
. You have at least one set of black clothes or dresses.
and then use discarded umbrellas to make bat wings, very interesting. The steps are as follows, the key point is to keep the umbrella skeleton.
skeleton
z5
z5 For example,
, like the following, just stick out the bones with black tape, and add a mask for easy operation.
If it is at night, you can also consider wearing black clothes and sticking to your body with a light stick. People walking on the road only see the skeleton. This gameplay was once a hit in Douyin.
Buy more light sticks, and paste the eyes, mouth muscles, etc., for better results.
Star Wars R2
Star Wars fans must consider this look.
First find a large cylinder, if not, you can use the kind of round basket for toys and clothes at home, as shown in the figure below.
If you don’t have
, you can take a hard shell paper roll.
dyed white with spray paint or pigment. In terms of size, remember to make the bucket cover below the child's knee. The
helmet can be made with a washbasin, with a layer of soft sponge foam inside to protect the child’s head, and the size of the helmet can be adjusted by the way.
Draw the dashboard of the robot on the helmet, find some screws or bottle caps to stick it on to create a high-tech effect.
Finally, use foam and cardboard to make the two hands of the robot and stick them on both sides of the barrel.
Fix two straps inside the trash can, let the child "back" the trash can, and you're done.
It is also possible to make a robot with a square carton.
rainbow wings
name is not very interesting to listen to it, read on you will know
preparation: corrugated paper, paint, nonwoven (jam can), strong glue or tape
first of all on a large cardboard (reference Size: 121cm in length, 35cm in width), cut out the extra part of the cardboard according to the following figure. The reference size is shown in the figure below: 25.4cm*40.6cm
After cutting out, use a paper plate or a round plate to change the corners circular
painted their favorite color
plurality of cut feathers on the nonwoven fabric, the size of these can be different
feathers with hot glue gun, attached to the other side of the corrugated cardboard
Finally, the corrugated do Pull out 4 loops of the hand so that the wings can be put on the arm
. Such a colorful red wing is completed. Take it out for a test flight. Look at the picture below:
cute little snail
There is a cute little girl at home, this shape is very suitable.
Preparation materials: kraft paper, masking tape, headband, 6zz9, zzzz2, 6z , hot glue, paper tape, headband, 6zz9, zzzz2, 6zz2, zzz11 1m size, crumple the kraft paper, and then roll them up
roll up the kraft paper, and use tape to fix it with tape to prevent it from getting out of shape. The glue gun fixes two pieces of tape on a cardboard, and then sticks it on the kraft roll to make the effect similar to the schoolbag
. We can use the girl’s hairpin and use kraft paper to make 2 "tentacles". 2 foam balls glued to the antennae, and finally do not forget uniform color Oh
such a shape on the girl, you can definitely dominate the small circle of friends
crab
fall but (to eat) crab season, waving claws crunch Crunchy, vigorous, arrogant!
First make the shell and four legs of a small crab.
The crab shell can be cut into an oval shape with a large cardboard, and then cut four openings along the dotted line as shown in the figure below, and then paste the corner of the black 1 to the white 1, and so on, you can make The arched hemisphere is like the cut mouth of a mask.
Then cut out the naturally curved crab legs from the cardboard, stick them to the crab shell, just like making jetpacks and angel wings, adding two straps is OK.
Crab headgear can use a large bowl of instant noodle container, stick a straw/twisted stick on it, and add two ping pong balls or white round cardboard as eyes. Remember to draw black eyeballs.
can also use disposable paper trays, paint them with color, and cut out the shape as shown in the middle.
plus eyes, this is the effect on the head.
The hardest part is the two crab claws.
The complicated way is to cut out two pieces of crab claws and glue the edges together.Keep the opening at the bottom so that the hand can reach in; the simple way is to make only one layer, stick a chopstick or stick underneath, and let the baby hold it directly.
Teenage Mutant Ninja Turtles
z4 is a very powerful and very powerful character.
First do the iconic blindfold of Teenage Mutant Ninja Turtles.
Print the template picture of this eye mask below.
(click to open the big picture and save it to print)
cut out and place it on cardboard or non-woven fabric to trace the corresponding shape, and then cut it out. The shapes of
are very simple, and they can also be drawn directly by hand, saving the steps of printing and tracing.
Then stick the two orange strips on both sides of the eye mask as extended bands; the green part is glued to the upper middle; the non-woven material is glued with hot melt adhesive, and the cardboard can be ordinary double-sided adhesive and single-sided adhesive.
try to put on the blindfold, the jammed version is stuck on both ends directly.
and then make turtle shell . If you happen to have a large tin foil plate, such as the one that comes with the take-out sauerkraut, it will be perfect.
tin foil plate is colored with paint (acrylic paint is better), you can make a layer of brown base, then green, there will be an old mottled feeling, after all, the "turtle" floats in the rivers and lakes, how can it not be knifed. Poke a small hole on both sides of the foil tray
and fasten the straps.
The turtle shell is decorated with orange paper, and the Teenage Mutant Ninja Turtles will be here!
If there is no tinfoil plate for tortoise shells, it does not matter. Refer to the crab shell method above and replace it with green cardboard.
The Little Mermaid
Many little girls have a Disney princess dream. The princess cos costumes of a certain treasure are expensive and thunderous. It is better to make a DIY dress of the little mermaid princess, just a few times, simple and eye-catching!
hard cardboard or EVA foam is a more suitable material to make it more stiff and stylish.
Cut out half of the fish body and tail shape on the cardboard, and then it is gone.
Well, let's add a variety of colors of semicircle as the scale decoration decoration, glue the rope strap and tie it to the waist, and it is done.
fear dragon
z3 is so popular with mothers because it’s just being forced by hand!
hard cardboard cut out a strip of roughly equal width, which is almost a rhythm of 8 open paper and 6 equal parts.
Then fold each strip in half, cut off the two triangles on both sides, and leave a section at the fold. When
expands in this way, the middle rectangle is connected to the left and right triangles, which is used as the bone plate on the back of the dinosaur, as shown in the right picture below.
Use another long strip as a long spine to connect each bone plate. Fold up the triangles on both sides of
and stick them together with glue/double-sided tape.
Finally, use a long strip to surround it in a circle, stick it firmly, and then fix a section of the spine in an arched shape.
dinosaur headgear is complete, try it on.
Then come to do dinosaur big feet.
cut out the shape of the bottom of the foot, paste the triangular claws, and cut out a hole into which the baby's feet can go (it is better to cut out a hole similar to a kitten in the picture below, and leave the upper one as a baffle); Finally, a strap is attached so that the baby can hook it from underneath after putting it on to increase control.
Don’t panic, print the template picture below and just do it.
(click to open the big picture and save to print)
is done with the feet, and then come to the small paws.
palm-shaped cardboard, taped on the lower part (you can use a wide section of tape to stick together, it becomes a transparent non-sticky tape).
can make a crease at the joint between the toe and the palm, so that the shape of the claw is more natural.
From head to toe, the dinosaur cos is dressed up and armed. If your baby is a dinosaur fan, do it now!
jellyfish
. It’s strange that many children are fascinated by some unusual sea creatures, such as 6zz11, 6zz9, 6zz2, 6zz9, 6zz2. Dinosaurs appear early, low-level invertebrate creatures, but they feel particularly powerful, and they are dreamy when they glow!
Is it difficult to install a set of jellyfish?
Don't be too simple!
If you happen to have a transparent umbrella, then this manual has been completed 80%.
The remaining 20% of the work is to find some cloth strips and ribbons to stick to the edge of the umbrella; if not, take some plastic bags, bubble paper for packaging, etc., as shown below, cut into mosquito coils. , Opened is a vivid and unique "jellyfish tentacles".
Try to turn it around. Isn't it a fairy?
paste the eyes on the umbrella, the cute little jellyfish is complete!
no transparent umbrella? A straw hat with a wide brim is fine too!
hat? There is always a disposable shower cap in the hotel (it seems that this texture is the closest to real jellyfish)!
Okay, this year’s Halloween broadcast will come here first
