. Recently, it was reported that Robert Downey Jr. will be dubbing in Marvel’s new animated drama "What If..." and will return as Iron Man again. Seeing this, the fox bursts with tears. .
Let’s review the evolution of Iron Man suits in the past, from MARK1 to MARK85.
MARK 1
Mark 1 is the first mech created by Tony Stark and appeared in the movie "Iron Man". The "Iron Man" movie used a lot of space to describe the birth of MARK 1.
Mark 1 is the only armor equipped with a flamethrower. The production is so rough that it looks really unsightly. Its defense is very weak and can only deal with small arms shooting. The armor is equipped with jet boots at the bottom of the mecha. The appearance of MARK 1 in the
movie is still the hottest moment in the film.
MARK 2
MARK 2 is based on the MARK 1 prototype and appeared in the movie "Iron Man". It is mainly used to test and explore all aspects of armor performance. The armor color is unmodified steel silver.
Mark 2 is the first armor capable of continuous flight. Its internal device can produce ultrasonic waves through electric arc, so as to achieve high-speed flight. The transformation of MARK 2 in the
movie can be called a visual feast of the technical house. Almost every function is reflected, especially the arm and leg armor also showing very detailed design drawings. The heavy test of
MARK 2 was placed on the stabilized aircraft. It is the first armor capable of continuous flight.
MARK 2 is equipped with the Jarvis system, which can perform target scanning, global positioning system and provide user vital signs data. The biggest shortcoming of
MARK 2 is the phenomenon of icing at high altitude, mainly due to material problems. Tony's flameout occurred during the first flight test.
MARK 3
Mark 3 is the third suit created by Tony Stark and the armor that Tony uses the most. In the movie "Iron Man", Tony wears Mark 3 armor to fight terrorists.
Mark 3 is the first set of colored armor, the color is classic red and yellow, and the color theme is derived from Tony's classic car. The biggest difference between
MARK 3 and MARK 2 is the improvement of the material, which solves the problem of icing at high altitude. When MARK 3 was painted in the movie, there were special shots with masks and design drawings.
MARK 4
At the Stark Expo at the beginning of "Iron Man 2", Tony wore MARK 4 in a classic iron man look. It was used by Tony Stark to replace the severely damaged Mark 3 at the end of "Iron Man." There is a shot in the
movie, which was given to Tony's armored showcase. It can be seen that MARK 3 is already scarred and in retirement. Compared with the previous generation, MARK 4 is more streamlined in appearance and speeds up the flight.
Mark 4 and Mark 3 are very similar in appearance at first glance, but the difference is not small. The chest, shoulders and abdomen of the armor are all new designs, which makes the overall line of Mark 4 tougher than Mark 3.
MARK 5
Mark 5 is the fifth set of steel armor created by Tony in red and silver. It is a portable armor made to deal with emergencies after Tony's identity as Iron Man was exposed. It can be assembled anywhere and folds into a suitcase when not needed for easy carrying.
Mark 5 is designed to be portable and can be used in emergency situations. Therefore, Mark 5 is only equipped with pulse cannons on the palm and chest without adding more weapons.
In order to reduce the overall weight of the armor, the Mark 5's armor has only a single-layer design, the overall style is soft, the attack is weak, and the defense level is low.
Gears of War (derived from MARK 2)
War Machine is considered a gift from Tony proudly "given" Rod.
Iron Man 2, War Machine is controlled by Vanke and used to attack Iron Man. In Iron Man 3, the war machine was transformed and upgraded to the Iron Patriot. When
was in the third installment, AIM repainted the war machine and renamed it "Iron Patriot".
MARK 6
Mark 6 is a multi-purpose armor set, the sixth armor set created by Tony Stark after solving the palladium arc reactor poisoning. The colors are red, gold and silver.
Mark 6 is the first armor equipped with a triangular arc pulse gun on the chest. The biggest difference between it and the previous armor is that it uses a vibrating arc reactor, which can provide more energy. The defensive armor of
Mark 6 is quite powerful, with only minor damage in general combat. Mark 6 can also absorb external energy and convert it into armor energy. These are reflected in "Iron Man 2" and "Avengers".
Mark 6 is equipped with a single-use laser weapon, which can be used to cut anything in a short time.
MARK 7
Mark 7 is the seventh suit created by Tony and appeared in the movie "Avengers". Mark 7's laser guided tracking rapid deployment system is a technological breakthrough, and it is also the most basic deployment method for later versions of Iron Man armor.
is different from the previous armor, Mark 7 is a heavy armor specially designed for combat. Its deployment method is based on Mark 5 (suitcase armor), but it is faster and more convenient.
In "Iron Man 3" you can see Tony display this armor along with the previous six generations as a souvenir.
MARK 42
Mark 42 is named "The Prodigal Son". At the end of the movie "Iron Man 3", it blew up to help Tony deal with Aldridge Killian. The color scheme is light gold and dark red. The
Mark 42 armor is another technological breakthrough. Its appearance indicates that the Iron Man armor mode will change again (similar to Mark 7).
At the end of the "family party", the prodigal son finally returned to the team, Tony let him automatically wear the villain Jilian and blow up himself, but failed to kill the villain, and in the end MARK 42 only left a mask.
MARK 9
Mark 9 appeared in the movie "Iron Man 3". In addition to the redesigned helmet, hips and legs, Mark 9 has many similarities with its predecessor, for example, it also retains the most classic gold and red color scheme. The
Mark 9 helmet and hip armor plate design is very distinctive. The chest continues to use a circular design, and the defensive armor level is the same as Mark 8. In addition, the Mark 9 carries a small number of powerful missiles. After
, Pepper also fired a pulse cannon on his MARK 9 arm to kill the villain Jilian.
MARK 43
Mark 43 appeared in the early stage of "Avengers 2" and is an improved version of Mark 42. Increased shotgun on the shoulders. Mark 43 armor is the exact opposite of Mark 42. It is mostly dark red and few gold.
In "Avengers 2", when the Hydra base was destroyed at the beginning and the first time Ultron played against Ultron, MARK 43 appeared. This is basically the actual combat version of MARK 42.
MARK 44 (anti-Hulk armor)
Mark 44 appeared in "Avengers 2: Age of Ultron" and was specifically used to fight against Hulk. It is usually mounted on a satellite, flying in low-Earth orbit, and launched to the desired position when in use. The body is very huge, even a lap bigger than Hulk, it can wrap other armors.
MARK 44 can be assembled on other battle suits, and it can be seen that after the assembly is completed, a flight equipment warehouse will fly from a distance, and spare parts can be provided when damaged.
MAKR 45
Mark 45 appeared in the late "Avengers 2: Age of Ultron". At this time, the system has been replaced with a female voice "Friday".
appeared in the final battle against Ultron. This set is not so yellow, and the whole is particularly red, so it has a sense of reinforcement than the previous generations. It is also the first battle suit equipped with the Friday system. The color scheme of
MARK 46
Mark 46 is red and gold. Appeared in "Captain America: Civil War". Mark 46 has a function that all previous armors did not have. Its helmet can be automatically stored in the armor. The
Mark 46 armor is very fast, it only takes about 2 seconds to participate in the battle, and the portability is greatly improved, and the dressing is also extremely convenient.
MARK 47
Mark 47 appeared in the Marvel movie "Spider-Man: Homecoming". The color scheme is dark red, gold and gray.
Mark 47 has a fully retractable helmet and also uses new nanotechnology. Fully bulletproof, withstand explosions and very powerful attacks.
Mark 47 can enhance flight through its anti-gravity device and flight stabilizer. It uses energy more effectively than all previous armors.
In addition to the pulse cannon that comes standard with armor, the Mark 47 also has powerful rockets and electromagnetic pulse weapons.
Mark 50
Mark50 is the latest mech that Stark wore in "Vengeance 3", using the energy of the new heart reactor, made by vibrating gold. Made with the latest nanotechnology, the energy response device placed on the chest can cover the whole body after activation, and can even regenerate if damaged, but the number of times is limited. The
mech can be transformed into weapons and shields at will. The hands and feet can be turned into heavy weapons, which can emit pulses, which is quite handsome.
Mark 85
MARK85 Nano-scale general-purpose armor, the armor used in the complex 4 timeline, optimizes the performance of nano-type equipment, making it safer and more powerful. In the
attack, MK85 did not perform much, and in essence it did not have much improvement compared to MK50, but they all possessed the ability to damage alien weapons.
MK85 improves the dressing ability, no need to tighten the jacket to reduce the difficulty of nano-material extension, and at the same time the chest reactor does not have to be exposed outside the clothes all the time when it is in standby; press the reactor during use, the reactor "floats" through the shell made of nano-material The surface of the clothes, and then quickly expand the nanomaterials.
is currently the last armor set, MK85 does not show off too much, but shows its optimization compared to MK50 through a limited angle, as well as a rolling upgrade to older models of armor.
and above are the Iron Man armors that appear in the Marvel series of movies. We also look forward to the continuation of the legend of Iron Man in another way.
