I heard that it has started to cool down and snow in many places in the past two days, so I quickly prepared the heater at home. Speaking of heaters, it is quite strange that there is an owner in the community next to my house. He secretly turned on the heating water at home, and as a result, all the residents in the building were " "It's cool", the owner said: It doesn't matter to me that your house is not hot, my house is very hot!
In fact, this has happened in many communities. In order to gain advantage, some owners privately installed faucets on their own heating equipment and used them to flush toilets and wash hands. This behavior is not allowed and has a great impact on the entire heating cycle system.
For the surrounding neighbors, someone secretly drains the heating water upstairs and downstairs, which causes the heating equipment to constantly add cold water. Heating will take a certain amount of time, so there will be a phenomenon where the heating in the home is turned on but not hot. It's all for nothing and a waste of money.
For the owner himself, installing a faucet on the radiator without permission will not only cause disputes with neighbors, but he will also be fined if found. In addition, the water in the radiator is industrial water, not tap water, and it has been heated and flowed in the pipes for a long time, so it has long been unclean. Some may have chemicals added, so it is best not to use such water.
How to check if someone is releasing heating water privately in the community?
First of all, it is naturally that the heating in the home is suddenly not hot. Secondly, the heating equipment in the community needs to be replenished frequently. Either there is a water leakage problem, or someone secretly drains the water. You can check it. Finally, if there is an owner who exhausts the radiator, If there is no water, it is very likely that someone is draining heating water without permission.
Regarding the temperature of the inlet and return water in the radiator, the indoor heating temperature of the general community is 18°C, the inlet water is 80°C, and the return water is 60°C. If someone secretly drains the water and the heating equipment keeps replenishing cold water, then the heating pipe When the water temperature in the room becomes lower, the heat dissipation of the radiator will naturally decrease, and the home will naturally become less warm.
Some owners said that my home’s heater becomes hot when the water is turned on, and becomes cold when it is not turned on. I am also very helpless. In fact, this is caused by air in the heating pipe and unbalanced return water pressure. It is necessary to find the cause and solve it instead of blindly draining the water. First close the circulating water supply valve, then open the exhaust valve at a high place, and then the air can be smoothly discharged and the heating in the home can be restored.
Discharging the heating water privately is harmful to others and not self-serving, and even if the heating water is released, it cannot be used. If the heating water in your home is not hot, you need to find a master to solve it. In the end, you think it is getting hotter and hotter, but in fact it is getting colder and colder. . The temperature is about to cool down again. If your home heater is not hot, hurry up and check it out!