You only need to use a chopstick to easily remove the hair in the bathroom sewer. This is a good method. It would be a shame not to learn it.
The sewer in the home is often a place that is easily overlooked. Over time, the hair strands inside will gradually accumulate. Although there is a layer of filter, it still cannot prevent some hair from entering the sewer. Over time, this hair can accumulate in drains and cause blockages. Faced with such troubles, we actually don’t need to spend a lot of money to hire someone to clear them.
Now, every time you order takeout, it comes with disposable chopsticks. These chopsticks are often thrown away after use, but they actually have many uses around the home. For example, in the bathroom, we can place a pair of disposable chopsticks specifically to solve the problem of sewer blockage. Just a pair of chopsticks can easily solve the problem of clogged sewers. This is because disposable chopsticks cost less and are very convenient to use. So, what exactly do you do?
The first method, first of all, prepare two chopsticks that are not used at home. Then use a utility knife to make a few cuts on the head of one of the chopsticks and cut a few grooves. Be careful not to cut off the chopsticks. At this time, the chopsticks will feel uneven. Just make a barbed chopstick like this. Then join the two chopsticks together and wrap them together with tape to secure them.
Next, let’s see the effect. Put the chopsticks into the sewer, dig it out, turn it around a few times, and then pull it out. We can see that the hair in the sewer has been cleaned out. If the sewer opening at home is relatively deep, you can use tape to lengthen the chopsticks and add one or two pairs of chopsticks. Remember to wrap the tape around it several times to make it stick firmly to prevent the chopsticks from loosening and falling.
For the second method, we need to prepare one chopstick and three ordinary cable ties. First, we cut some barbs out of the cable ties and cut the three cable ties in half. Then, use chopsticks to hold them together and securely with clear tape. Just remember to make sure it's firmly attached so the ties don't fall into the drain.
If the drain is clogged with dirt and grease, we can use baking soda and white vinegar to solve it. Pour baking soda into the drain, half a bag is enough. Baking soda not only removes grease but also removes stubborn dirt. Next, pour in half a bottle of white vinegar. The acid-base combination reacts to break down dirt and oil. After letting it sit for half an hour, the sewer pipe will no longer be clogged. This method can also remove odors.
In addition, we can also make a self-made filter artifact. According to the size of the sewer, cut the discarded steel wire balls and take out one piece. Thread the rope through the steel wool ball and tie a tight knot. Put it into the bathroom sewer and tie the rope to the floor drain cover. The steel wool ball acts as a filter, and the hair that falls in will get stuck on the steel wool ball, which will no longer block the sewer, and the water will flow unobstructed.
In addition to unclogging sewer pipes, chopsticks can also be used to unclog toilets. First, we can use tape to connect two chopsticks to make an extended version of the chopsticks. Next, prepare a plastic bottle and cut a hole in the top half with a knife. The hole doesn't need to be big, just big enough for chopsticks to fit through. Then, use glue to secure the chopsticks in the hole.
We only need to put this prepared tool in and unclog the toilet, and the toilet will be unclogged. This is because the chopsticks increase external pressure, causing the clog to be pushed into the toilet, thus unclogging the toilet. When the water level begins to drop, the toilet is drained. Finally, we just need to flush the water and see that the toilet unclogs easily. This principle is to use atmospheric pressure to unclog the toilet. The principle is similar to that of a toilet unclogger.
-
-
-
-
-
-
-
-
-
-